To be properly guarded, a floor opening should have both a standard railing and a standard toeboard. Open-sided floors or platforms 4 feet or more above the adjacent floor or ground level must be guarded by a standard railing on all open sides, except where there is an entrance to a ramp, stairway, or ladder.
Which property describes a floor opening?
What properly describes a floor opening? A floor opening is an opening that: Measures at least 30 in. (762 mm) and 18 in.
Which of the following best defines a toe board?
Definition of toeboard
- a : the sloping boards in the floor of an automotive vehicle in front of the forward seat.
- b : a curved piece of wood fastened to the ground at the front of the circle used for shot putting, throwing the weight, or similar contests to prevent overstepping.
What is being described in the following definition an opening in the floor platform or pavement that measures 12 inches or more and through which persons may fall a floor hole B floor opening c wall opening D railing?
A floor opening is an opening or entry or hole that is at least 12 inches or more than that in the pavement, yard, platform, floor or anything in which someone or something can fall in it. It is made for the entry or exit of person to fix anything under or above this pavement or platform.
What are the top 3 OSHA cited ladder violations?
Top 10 Most Frequently Cited OSHA Violations in 2019
|Type||Number of Violations|
|1. Fall Protection (General)||6,010|
|2. Hazard Communication||3,671|
|4. Control of Hazardous Energy (Lockout/Tagout)||2,606|
What item is an example of fall protection?
Personal fall protection system means a system (including all components) an employer uses to provide protection from falling or to safely arrest an employee’s fall if one occurs. Examples of personal fall protection systems include personal fall arrest systems, positioning systems, and travel restraint systems.
What are approved fall protection measures?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
What is the purpose of a toe board?
Toeboards are protective barriers that are placed near the ground or walking surface. They are often used when there is a risk that tools or other objects could fall onto a person from a platform or other raised area, or through a floor opening or hole.
What is the minimum height of toe board?
A standard toeboard shall be 4 inches nominal in vertical height from its top edge to the level of the floor, platform, runway, or ramp. It shall be securely fastened in place and with not more than 1/4-inch clearance above floor level.
When should toe boards be used?
You must fit toe board to the working platform and any other platform where a risk assessment has shown that there is a danger of materials falling from that platform and injuring a person below. That risk may exist even at low platform heights.