Which location is not required to be GFCI protected?

GFCI protection is not required for receptacles that are not readily accessible, such as a ceiling-mounted receptacle for a garage door opener. Nor are they required for a receptacle on a dedicated branch circuit located and identified for a cord-and-plug-connected appliance, such as a refrigerator or freezer.

Where are GFCI not used?

Outdoors, except where receptacles on dedicated circuits are not readily accessible, and are used to supply snow-melting, deicing, or pipeline and vessel heating equipment. Crawl spaces. Unfinished basements, unless the receptacle is on a dedicated circuit and used to supply a burglar alarm.

Which is not an example of where a GFCI is required?

Exceptions: GFCI protection is not required for the receptacles supplying only a permanently installed fire alarm or burglar alarm system, receptacles that are not readily accessible, or receptacles on a dedicated branch circuit and labeled for use with plug-in equipment (ex: sump pump).

Where do you need GFCI outlets?

GFCIs are required by the National Electric Code (NEC) in all kitchens, bathrooms, crawl spaces, unfinished basements, garages, and outdoor receptacle locations. Outdoor outlets also require special boxes and covers.

IT IS INTERESTING:  What happens if you call the Coast Guard?

What’s the difference between GFI and GFCI?

Ground fault circuit interrupters (GFCI) and ground fault interrupters (GFI) are the exact same device under slightly different names. Though GFCI is more commonly used than GFI, the terms are interchangeable.

How many outlets can one GFCI protect?

There’s no limit. A standard GFCI will protect up to 20 amps, drawn from any combination of receptacles, either the built-in one or any number of additional ones connected to its load terminals.

Does every outlet in a kitchen need to be GFCI?

All countertop receptacle outlets must be protected by a GFCI device installed at the outlet or by GFCI circuit breakers. A kitchen must have two 20-amp circuits for countertop appliances. There should be countertop receptacles installed so that no point along the counter is more than 2 ft. from an outlet.

What appliances require GFCI?

The NEC requires GFCIs on all exterior and bathroom receptacles (another term for outlets). GFCIs are also required on all receptacles serving kitchen countertops. In laundry rooms and utility rooms, GFCIs should be installed on outlets within six feet of sinks, washing machines, and water heaters.

Does a range have to be GFCI protected?

3 Answers. No in any case. Electric range circuits and receptacles do not require GFI protection, and if this is a regular receptacle for a gas range it is behind the range and not serving the counter, so again ,no GFI required.

What happens if you don’t have a GFCI?

GFCI stands for Ground Fault Circuit Interrupter. This type of outlet constantly monitors the electric current running through it. … Without the GFCI outlet, if something were to happen and an appliance was plugged in and fell into water, the electricity would travel through the water and could cause a deadly shock.

IT IS INTERESTING:  What is secure online transaction?

Can you have 2 GFCI outlets on the same circuit?

Yes, you can use two or more GFCI outlets on the same circuit without any problem at all. The only downside to this is that if one of your GFCI outlets goes down, the others will probably go down as well. … It is well worth putting two or more GFCI outlets on the same circuit, and it’s quite common.

What happens if no GFCI?

If this “short circuit” occurs and there is no ground wire present, the current could find its way to ground through other building components in the wall, potentially causing a fire. Or, if you were to touch the plug at an inopportune time, the current could find its way to ground through your body, causing a shock.