A key with a car outline in your Nissan’s instrument cluster is a Security Indicator Light. This light’s purpose is to assure you that the security systems equipped on the vehicle are operational. It should blink any time the ignition is placed in the OFF, LOCK, or AUTO ACC positions.
How do I turn off the security light on my Nissan?
1. Leave the ignition switch in the ON position for approximately 5 seconds. 2. Turn the ignition switch to the OFF or LOCK position, and wait approximately 5 seconds.
How do you reset a Nissan security system?
If You have tripped the car’s alarm by accident, depress the fob’s panic or unlock button, to switch the alarm off. Alternatively, insert the key into the driver’s door to unlock and reset the immobilizer. You can also try pressing the panic button for 5 seconds followed by depressing the lock button 2 times.
Why is my security indicator light flashing Nissan Altima?
The blinking security indicator light indicates that the security system(s) equipped on the vehicle are operational. The Nissan Anti-Theft System and the Nissan Vehicle Immobilizer System us this flashing key image to relay information to the driver about either the doors being unlocked or about the key itself.
What does it mean when security light comes on?
When the security Warning Light is illuminated, that means that the theft-deterrent system may not be working properly. Tip Like all warning lights, the security Warning Light will briefly illuminate when your vehicle is turned on. The light is only a problem if it stays lit when the engine is running.
What does security indicator light mean Nissan?
A key with a car outline in your Nissan’s instrument cluster is a Security Indicator Light. This light’s purpose is to assure you that the security systems equipped on the vehicle are operational. It should blink any time the ignition is placed in the OFF, LOCK, or AUTO ACC positions.
How do I get my car out of anti-theft mode?
How To Shut Off Your Car’s Anti-Theft Device
- Method 1: Check the cylinder and key. Step 1: Check the key fob battery. …
- Method 2: Turn on the ignition. If your engine has been locked up by the anti-theft system, you will be unable to start it. …
- Method 3: Insert the key into your car’s door.
Why is my security indicator light flashing?
If the Security Indicator Light is flashing with the key out of the ignition lock and accessory position, this is a normal sign that the alarm and the immobilizer system is active. While starting the car or key in the “run” position, the security lamp should illuminate briefly then go out.
How do you bypass Nissan Anti theft system?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.
What does the car with the key symbol mean?
The red key warning light means there is a security error code. This light illuminates when the vehicle control modules see the ignition turned with a key that is not programmed to the vehicle or when there is an error within the security protocol of the vehicle’s security system.
How do you start a car when the security light is on?
If nothing happens or the engine starts and dies, the security light will be flashing. Leave the key in the On position and wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.
Can my car alarm cause my car not to start?
The failure of the alarm system may cause the engine not to start. In case it is not working correctly, then you have to shut it off. Your car will not resume its operations unless you fix the alarm complications.
How do I reset my car alarm?
Resetting the Alarm
- Close all of your car doors.
- Insert one key in the door lock and cycle it to the “Lock” position, and then back to the “Unlock” position two times. …
- Enter your car and insert your key into the ignition cylinder.
- Cycle the key in the ignition from the “Off” position to the “On” position twice in a row.