Safety nets are designed to hang below high-level work areas such as roofs on residential construction sites. Fall protection safety nets are not a mandatory part of fall protection. … According to OSHA a personal fall arrest system means a system used to arrest an employee in a fall from a walking-working surface.
Is a safety net approved by OSHA?
Safety nets shall be provided when workplaces are more than 25 feet above the ground or water surface, or other surfaces where the use of ladders, scaffolds, catch platforms, temporary floors, safety lines, or safety belts is impractical.
What are acceptable forms of fall protection?
Generally, fall protection can be provided through the use of guardrail systems, safety net systems, or personal fall arrest systems. OSHA refers to these systems as conventional fall protection. Other systems and methods of fall protection may be used when performing certain activities.
When should a safety net be installed?
Safety nets must be installed as close as practicable under the surface on which employees are working, but in no case more than 30 feet below. When nets are used on bridges, the potential fall area must be unobstructed.
How do I install a safety net?
Installation of Horizontally Spanned Safety Nets. Building-site nets have to be anchored at stable, load-bearing points. For measuring each suspension point a characteristic load of at least 6 kN with an angle of 45° must be adopted. The suspension points must not be positioned more than 2.50 m apart.
How many types of safety nets are there?
CONSTRUCTION SAFETY NET
|4MM KNOTTED TYPE SAFETY NETS|
|Mesh / Inner Rope||4MM IS:5175:1992|
|Mesh Size –||100MM x 100MM Square/ 4”x4”|
|Second Layer||Overlay Containment Net of HDPE UV Stabilized Blue Net|
|Fabricating||Diamond type Knotted|