Fail-secure means the doors will lock when power is removed. Wire the positive leg directly to the lock. Connect the negative leg from the power supply, through the normally open relay on your controller, to the lock.
Can a Maglock be fail secure?
Maglocks require constant power to stay locked, making them fail-safe. That could lead to an unsecured opening in the event of a power outage. … They should be used on doors where entry security is a concern since they will remain locked during a power outage.
What is a failed locked lock?
So a fail secure lock locks the door when power is removed. Often fail secure locks are used for IT rooms or other sensitive areas. However because the door keeps being locked in emergencies, typically it will be usable with a mechanical override, such as a regular key.
What happens to a fail-safe electrified mortise lock when the power is turned off or fails?
Electrified mortise locks typically have a mechanical override function so that they can be opened by using a key or by turning the handle. … Thus when power to the lock is disengaged or “fails”, the lock will go to its fail-safe (unlocked) or fail-secure (locked) mode.
Is fail secure normally open?
Fail safe works like explained is a Normally Open device will release the door when power is lost. Fail Secure is a Normally Closed device and keeps the door locked until power is received.
Do mag locks get hot?
Fail safe electric strikes have a constant 24V to the lock to keep it in the secure position. This will cause the locks to run hot.
Are electromagnetic locks safe?
Electromagnetic locks are reliable because they do not have any moving parts. Electromagnetic locks are easy to install since they are comprised of two major components and require three screws to install. … Electromagnetic locks are intrinsically Fail Safe. When power is cut to an electromagnetic lock, it unlocks.
How do you clean a magnetic lock?
Carefully and thoroughly wipe the surface of the magnet to remove any build up. Rinse or wipe the magnet off with clean water. Leave the magnets out to dry. Sanitize them with a disinfectant spray (optional)
How does an electromagnetic lock work?
Electromagnetic locks consist of an armature and a coil assembly, which become magnetized when an electric current passes through them. This magnetic field secures the door and electronically controls when doors are locked and unlocked. Electromagnetic locks are fail-safe by design.